[MGR]

This took a lot longer than I was hoping. Mainly because I had to modify the 3D designs to fit some cheap Amazon LED lights.

I thought it would be fun to add an illuminated Triumph logo (which matches the one on my tank) on the rear cover, which has some red LEDs that connect to the running lights. Too much? I'm on the fence.

Final result (not wired in fully yet):

View attachment 62848 View attachment 62849 View attachment 62852

Just got the 3D printed and about to go shopping for the lights. The person who uploaded the files said these are for the Kellerman Bullet 1000 tail lights, but any other suggestions? I love how the Triumph logo also is lighted up. Can you share some pics on how you did that?

 

[MGR]

Final version:

View attachment 62914 View attachment 62915 View attachment 62916

I just got this 3D printed, any advise on how this is holding up on the long term? Also the person who uploaded these files said that he used the Kellermann Bullet 1000's for the tail lights, are there any other ones we could use? or just meant for the kellermann's? and how did you set up the Logo lights? I love how it looks!

 

[Traveller]

This took a lot longer than I was hoping. Mainly because I had to modify the 3D designs to fit some cheap Amazon LED lights.

I thought it would be fun to add an illuminated Triumph logo (which matches the one on my tank) on the rear cover, which has some red LEDs that connect to the running lights. Too much? I'm on the fence.

Final result (not wired in fully yet):

View attachment 62848 View attachment 62849 View attachment 62852

I like it. Looks great.

 

[SpoonMan]

Love what you've done. It looks awesome! Any chance of getting the print file please?

 

[Jordix]

Love what you've done. It looks awesome! Any chance of getting the print file please?

Hello,
yes, search in thingiverse website it's free. I'm doing mine actually.

For best result => resin printer ABS (not PLA classic).

 

[Jordix]

would those be legal in UK? Just worried about their separation distance..

In France it is 18cm and this copy or Thorton original respects it I don't know UK reglementation.

 

[Jordix]

Bonjour,
I just finished mine.🙂
I used the original wiring for plug and play.

 

[BBR]

What layer height did you use in that print? Did you use 0.08 for both parts?

 

[Jordix]

What layer height did you use in that print? Did you use 0.08 for both parts?

I d'ont know. I paid someone a few euros to do it (I don't have a printer).

 

[BBR]

It looks like a good finish. I tried 0.2 and the finish was ok, ok considering it won't really be visible.

It recommends 0.08 for the curved section, but that means having to do 2 separate prints. Doing them both at 0.08 would increase the time but give both parts a good finish. I might do it again in 0.08 for both parts.