Made by Wunderkind, I ordered them from A&J cycles.
Not real complicated to install, had to bleed the master cylinder.
They are machined with very tight tolerance which made the
pegs and fiber washers hard to fit. Also the brake side peg rubs
its mount and took the finish off (see pics).
With all this being said, The first ride with them I turned into a parking lot
and they rubbed the asphalt ,the stock pegs would not even come close.
At this rate I would grind the aluminum pegs off in a week.
I had to stop this , so I drilled and tapped the pegs and put the stock grinders
on the pegs.
I really like the controls but the few glitches has me bent out of shape.
The pegs grinding on the asphalt has to be addressed !