Join Date: Apr 2018
Location: West of Atlanta , Ga.
OK , Here is my solution . There is a narrow plastic cover running along the frame that the original length harness snapped in to. That is what you see in the above pic , with the plugs hanging out the left end. That channel has holes through the back side of it. I poked the new harness plugs out of the far left end of that channel and deposited them into the frame (just above where you fill the radiator , for those playing along at home). I then brought the original harnesses in to the frame just in front of that channel and snapped them all together inside the frame and pulled them up against the frame with a zip tie. There is room in there , but not much. Tested everything before I put the tank back on.
I am certainly no expert , but this seems way better than any other solution. I am not above being corrected , nor am I thin skinned. If I did it wrong , by all means feel free to correct me.
So far behind , I think I'm in first place.