Member
|
|
LinkBack | Thread Tools |
Bonevil
Are adapters available?
Is there anyone out there that makes exhaust adapters for the Bobber?
It would be great if someone could engineer the elbow pipe to fit the cat and was of a diameter to allow the fitting of the universal type mufflers that are out there.
Given the right length the seam could be hidden behind the header pipe shield.
It would be great if someone could engineer the elbow pipe to fit the cat and was of a diameter to allow the fitting of the universal type mufflers that are out there.
Given the right length the seam could be hidden behind the header pipe shield.
Bobber
I haven't run across any adapters, but it sounds like a great idea!
Each one matters.
Member
Join Date: Aug 2019
Location: NY
Posts: 89
thats probably an easy job for any muffler shop!?
Assuming they have the stock, they can cut, bend and flare the end.
Assuming they have the stock, they can cut, bend and flare the end.
| Sponsored Links | |||
|
Advertisement |
|
||
Senior Member
Join Date: May 2017
Posts: 487
I just used some 90 degree mandrel bends with an insert in them so the gases are less restricted through the bend.
Senior Member
Join Date: May 2017
Posts: 487
Just found this old thread I started a couple of years ago.
https://www.triumphbobberforum.com/f...pter-pipe.html
https://www.triumphbobberforum.com/f...pter-pipe.html
Last edited by trirocket3; 10-09-2019 at 01:00 PM.
Ericka
I just want some straight pipes, like the Delkevic brand, but ending with slash cuts like British Customs
So long, and thanks for all the fish!
Last edited by Sorcath; 10-10-2019 at 03:56 PM.
Quote:
Originally Posted by trirocket3
View Post
I just used some 90 degree mandrel bends with an insert in them so the gases are less restricted through the bend.
That is exactly what I would like to do. I just don't have the tools to make them
Senior Member
Join Date: May 2017
Posts: 487
I just bought the bends & inserts off a company on ebay, a while ago now but they were quite cheap.
Quote:
Originally Posted by Sorcath
View Post
I just want some straight pipes, like the Delkevic brand, but ending with slash cuts like British Customs
Each one matters.
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
|
| Posting Rules | |
